Osburn OB04002 Uživatelský manuál stáhnout pdf (Strana 64)

Stratford Fireplace Installation and Operation Manual

64 _____________________________________________________________________

8.7 ANGLED WALL RADIATION SHIELD

When passing through a combustible wall with the chimney at a 30° or 45° angle (30° or 45° in

Canada and 30° only in the USA), an angled firestop or wall radiation shield provided by the

chimney manufacturer must be installed. Only one is required. Follow the chimney manufacturer’s

installation instructions.

In cold climate locations, it is recommended that you use the insulated wall radiation shield since

it will maintain the home’s thermal barrier.

A INSULATED WALL RADIATION SHIELD

B GYPSUM BOARD

C INSULATED WALL

8.8 CHIMNEY SUPPORT INSTALLATION

8.8.1 UNIVERSAL ROOF SUPPORT

This support has three possible uses:

1. It must be used on a roof to support the chimney.

2. It may be used on a floor, ceiling or roof above an offset to support the chimney above the

offset.

3. It may be used on a floor, ceiling or roof as a supplementary support.

For roof support installation, refer to the instructions provided with the support by the chimney

manufacturer. Many manufacturers will provide the maximum height of chimney that can be

supported by the support. Make sure you respect those parameters.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 99 100

Žádné komentáře

Osburn OB04002 Uživatelský manuál Strana 64